• “CE” Concealed electric hinges conduct current regardless of door position to electric locks, exit devices, or hold open devices where tamper-proof hinge is required. Also to transmit signals from code readers on doors to remote computers for access control
• No electrical parts are exposed when hinge is installed
• Permanent fast pin
• Hinges should be installed in the center hinge location
• Not available as swing clear or raised barrel
• Hinges may be equipped with both concealed wires and concealed switches. When both are desired on the same hinge use prefix “CECS”
• Packed one per box with all machine screws and installlation instructions
• When ordering specify class number, size, finish and number of wires, Suffix -54 for 4 wires, 56 for 6 wires -66 for 6 wires (2@24AWG, 4@28AWG), 58 for 8 wires or 10 for 10 wires -18 for 8 wires (2@18AWG, 6@28AWG)
• Should be used along with a junction box
• Can be furnished with hospital tips

JB2R – Junction Box

• Note: Install in middle hinge location
• Can be shop welded or field installed — before frames are set
• Fits either 41⁄2" (114mm) or 5" (127mm) size hinges

• “CS” (Concealed Switch) Allows opening monitoring, switch operates when door is either open or closed. Used to activate alarms, monitoring devices, or other security equipment when a tamper-proof hinge is required
• Single pole double throw switch
• Packed one per box with screws and installation instructions
• No electrical parts are exposed when hinge is installed
• Hinges should be installed in the center hinge location
• When ordering specify class number, size, finish and hand of door
• Hinges are available as follows:
  • with Non-Removable Pins (NRP)
  • with hospital tips (HT)

Hinges may be equipped with both conceald wires and concealed switch. When both are desired use prefix CECS. Specify hand.